# Implementing new methods

#### Niek Den Teuling

In this vignette we demonstrate how to define new methods.

# Case study data

We will generate a dataset comprising two clusters with a different intercept and slope. Firstly, we configure the default id, time, and response variable, so that these do not need to be provided to the other function calls.

    library(latrend)
    library(data.table)
    options(
      latrend.id = "Traj",
      latrend.time = "Time",
      latrend.verbose = TRUE
    )

Next, we generate the dataset, with 40 trajectories for cluster A and 60 trajectories for cluster B. Cluster A involves trajectories with a downward slope, whereas cluster B has an upward slope. We define a fixed mean of 1, such that all the cluster trajectories are shifted, placing cluster A at intercept 2, and cluster B at intercept 1.

    set.seed(1)
    casedata <- generateLongData(
      sizes = c(40, 60),
      data = data.frame(Time = 0:10),
      fixed = Y ~ 1,
      fixedCoefs = 1,
      cluster = ~ Time,
      clusterCoefs = cbind(c(2, -.1), c(0, .05)),
      random = ~ Time,
      randomScales = cbind(c(.2, .02), c(.2, .02)),
      noiseScales = .05
    ) %>%
      as.data.table()

We plot the data to get a sense of different trajectories that have been generated. Visually, there is little group separation.

    plotTrajectories(casedata, response = "Y")

Since we generated the data, we have the luxury of looking at reference cluster trajectories, as stored in the `Mu.cluster` column. Note that `Mu.fixed` must be added to obtain the correct values.

    plotClusterTrajectories(casedata, response = "Y", cluster = "Class")

# Stratification

Rather than starting with clustering, in some case studies there may be prior knowledge on how to sensibly stratify the trajectories. Either by an observed independent variable (e.g., age or gender), or a certain aspect of the observed trajectory (e.g., the intercept, slope, variability).

Let’s presume in this example that domain knowledge suggests that stratifying by the intercept may provide a sensible grouping of the trajectories. This approach is further supported by the density plot of the trajectory intercepts, which shows a bimodal distribution.

    ggplot(casedata[Time == 0], aes(x = Mu)) +
      geom_density(fill = "gray", adjust = .3)

Based on the density plot, we will assign trajectories with an intercept above 1.6 to cluster A, and the remainder to cluster B.

    method <- lcMethodStratify(response = "Y", Y[1] > 1.6)
    model <- latrend(method, casedata)

    clusterProportions(model)
    #>   A   B
    #> 0.6 0.4

The approach we specified requires the first observation to be available, and is sensitive to noise. A more robust alternative would be to fit a linear model per trajectory, and to use the estimated intercept to stratify the trajectories on.

We can specify this stratification model by defining a function which takes the data of separate trajectories as input. This function should return a single cluster assignment for the respective trajectory. By returning a factor, we can pre-specify the cluster names.

    stratfun <- function(data) {
      int <- coef(lm(Y ~ Time, data))[1]
      factor(int > 1.7, levels = c(FALSE, TRUE), labels = c("Low", "High"))
    }
    m2 <- lcMethodStratify(response = "Y", stratify = stratfun, center = mean)
    model2 <- latrend(m2, casedata)

    clusterProportions(model2)
    #>  Low High
    #>  0.6  0.4

In case the linear regression step is time-intensive, a more efficient approach is to save the pre-computed trajectory intercepts as a column in the original data. This column can then be referred to in the expression of the stratification model.

    casedata[, Intercept := coef(lm(Y ~ Time, .SD))[1], by = Traj]

    m3 <- lcMethodStratify(
      response = "Y",
      stratify = Intercept[1] > 1.7,
      clusterNames = c("Low", "High")
    )
    model3 <- latrend(m3, casedata)

# Two-step clustering

We can take the approach involving the estimation of a linear model per trajectory one step further. Instead of using a pre-defined threshold on the intercept, we use a cluster algorithm on both the intercept and slope to automatically find clusters.

We first define the representation step, which estimates the model coefficients per trajectory, and outputs a `matrix` with the coefficients per trajectory per row.

    repStep <- function(method, data, verbose) {
      dt <- as.data.table(data)
      coefdata <- dt[, lm(Y ~ Time, .SD) %>% coef() %>% as.list(), keyby = Traj]
      coefmat <- subset(coefdata, select = -1) %>% as.matrix()
      rownames(coefmat) <- coefdata$Traj
      coefmat
    }

The cluster step takes the coefficient matrix as input. A cross-sectional cluster algorithm can then be applied to the matrix. In this example, we apply \(k\)-means. The cluster step should output a `lcModel` object.

The `lcModelPartition` function creates a `lcModel` object for a given vector of cluster assignments.

    clusStep <- function(method, data, repMat, envir, verbose) {
      km <- kmeans(repMat, centers = 3)

      lcModelPartition(
        response = method$response,
        data = data,
        trajectoryAssignments = km$cluster,
        center = method$center,
        method = method,
        model = km
      )
    }

We are now ready to create the `lcMethodFeature` method.

    m.twostep <- lcMethodFeature(
      response = "Y",
      representationStep = repStep,
      clusterStep = clusStep
    )

    model.twostep <- latrend(m.twostep, data = casedata)
    summary(model.twostep)
    #> Longitudinal cluster model using part
    #> lcMethodFeature specifying "two-step clustering"
    #>  standardize:    `scale`
    #>  center:         `meanNA`
    #>  time:           "Time"
    #>  id:             "Traj"
    #>  response:       "Y"
    #>  representationStep:`repStep`
    #>  clusterStep:    `clusStep`
    #>
    #> Cluster sizes (K=3):
    #>        A        B        C
    #> 35 (35%) 25 (25%) 40 (40%)
    #>
    #> Number of obs: 1100, strata (Traj): 100
    #>
    #> Scaled residuals:
    #>     Min.  1st Qu.   Median     Mean  3rd Qu.     Max.
    #> -3.08943 -0.67260  0.03618  0.00000  0.73723  2.64516

## General approach

The two-step model defined above is hard-coded for a given formula and a fixed number of clusters. In an exploratory setting, it is convenient to define a parameterized method. Here, we change the two functions to take arguments through the `lcMethod` object in the `method` variable.

Note that we can introduce new arguments which are not originally part of `lcMethodFeature` (e.g., `nClusters`) to enable the specification of the number of clusters in our method.

    repStep.gen <- function(method, data, verbose) {
      dt <- as.data.table(data)
      coefdata <- dt[, lm(method$formula, .SD) %>% coef() %>% as.list(), keyby = c(method$id)]
      # exclude the id column
      coefmat <- subset(coefdata, select = -1) %>% as.matrix()
      rownames(coefmat) <- coefdata[[method$id]]
      coefmat
    }

    clusStep.gen <- function(method, data, repMat, envir, verbose) {
      km <- kmeans(repMat, centers = method$nClusters)

      lcModelPartition(
        response = method$response,
        data = data,
        trajectoryAssignments = km$cluster,
        center = method$center,
        method = method,
        model = km
      )
    }

We create a new `lcMethodFeature` instance with the more generic functions. Defining values for `formula` and `nClusters` here makes these arguments values act as default values in a call of `latrend`.

    m.twostepgen <- lcMethodFeature(
      response = "Y",
      representationStep = repStep.gen,
      clusterStep = clusStep.gen
    )

However, because we omitted the specification of `formula` and `nClusters`, these need to be provided in the `latrend` call.

    model.twostepgen <- latrend(m.twostepgen, formula = Y ~ Time, nClusters = 2, casedata)
    summary(model.twostepgen)
    #> Longitudinal cluster model using part
    #> lcMethodFeature specifying "two-step clustering"
    #>  nClusters:      2
    #>  formula:        Y ~ Time
    #>  standardize:    `scale`
    #>  center:         `meanNA`
    #>  time:           "Time"
    #>  id:             "Traj"
    #>  response:       "Y"
    #>  representationStep:`repStep.gen`
    #>  clusterStep:    `clusStep.gen`
    #>
    #> Cluster sizes (K=2):
    #>        A        B
    #> 40 (40%) 60 (60%)
    #>
    #> Number of obs: 1100, strata (Traj): 100
    #>
    #> Scaled residuals:
    #>    Min. 1st Qu.  Median    Mean 3rd Qu.    Max.
    #> -2.9747 -0.6992  0.0589  0.0000  0.6958  2.9260