# Spatial weights objects as sparse matrices and graphs

#### Roger Bivand

## Introduction

Since the spdep package was created, spatial weights objects have been constructed as lists with three components and a few attributes, in old-style class `listw` objects. The first component of a `listw` object is an `nb` object, a list of `n` integer vectors, with at least a character vector `region.id` attribute with `n` unique values (like the `row.names` of a `data.frame` object); `n` is the number of spatial entities. Component `i` of this list contains the integer identifiers of the neighbours of `i` as a sorted vector with no duplication and values in `1:n`; if `i` has no neighbours, the component is a vector of length `1` with value `0L`. The `nb` object may contain an attribute indicating whether it is symmetric or not, that is whether `i` is a neighbour of `j` implies that `j` is a neighbour of `i`. Some neighbour definitions are symmetric by construction, such as contiguities or distance thresholds, others are asymmetric, such as `k`-nearest neighbours. The `nb` object redundantly stores both `i`-`j` and `j`-`i` links.

The second component of a `listw` object is a list of `n` numeric vectors, each of the same length as the corresponding non-zero vectors in the `nb`object. These give the values of the spatial weights for each `i`-`j` neighbour pair. It is often the case that while the neighbours are symmetric by construction, the weights are not, as for example when weights are row-standardised by dividing each row of input weights by the count of neighbours or cardinality of the neighbour set of `i`. In the `nb2listw`function, it is also possible to pass through general weights, such as inverse distances, shares of boundary lengths and so on.

The third component of a `listw` object records the `style` of the weights as a character code, with `"B"` for binary weights taking values zero or one (only one is recorded), `"W"` for row-standardised weights, and so on. In order to subset `listw` objects, knowledge of the `style` may be necessary

It is obvious that this is similar to the way in which sparse matrices are stored, either by row - like the `listw` object, or by column. The key insight is that storing zero values is unnecessary, as we only need to store the row and column locations of non-zero values. Early on, a Netlib library was used to provide limited support in spdep for sparse matrices, followed by functionality in SparseM, spam, and Matrix.

From spdep and spatialreg versions 1.2, this vignette and accompanying functionality has been moved to spatialreg.

### spatialreg depends on Matrix

Since Matrix is a recommended package, its functionality has increasingly been used over time, and it has become one of two packages on which spatialreg depends. This is reported on loading:

    library(spatialreg)

### Getting some data

The legacy Columbus OH data set has 49 spatial entities, polygons, defined as the boundaries of policing districts in the city. spatialreg imports from spdep which in turn depends on sf.

    dothis <- TRUE
    if (!suppressPackageStartupMessages(require(sf, quietly=TRUE))) {
      message("install the sf package")
      dothis <- FALSE
    }
    if (dothis) {
      sf_extSoftVersion()
    }

    ##           GEOS           GDAL         proj.4 GDAL_with_GEOS     USE_PROJ_H
    ##       "3.14.1"       "3.12.2"        "9.8.0"         "true"         "true"
    ##           PROJ
    ##        "9.8.0"

    library(sf)
    columbus <- st_read(system.file("shapes/columbus.gpkg", package="spData")[1])

    ## Reading layer `columbus' from data source
    ##   `/home/rsb/lib/r_libs/spData/shapes/columbus.gpkg' using driver `GPKG'
    ## Simple feature collection with 49 features and 20 fields
    ## Geometry type: POLYGON
    ## Dimension:     XY
    ## Bounding box:  xmin: 5.874907 ymin: 10.78863 xmax: 11.28742 ymax: 14.74245
    ## Projected CRS: Undefined Cartesian SRS with unknown unit

    row.names(columbus)[1:10]

    ##  [1] "1"  "2"  "3"  "4"  "5"  "6"  "7"  "8"  "9"  "10"

### Finding contiguous neighbours and droppping links

Contiguous neighbours are often used for polygonal spatial entities, here with the poly2nb function defaulting to the queen criterion - entities are neighbours if they share a boundary point. We see that the entity IDs are copied across to the `nb` object:

    nb_q <- spdep::poly2nb(columbus)
    nb_q

    ## Neighbour list object:
    ## Number of regions: 49
    ## Number of nonzero links: 236
    ## Percentage nonzero weights: 9.829238
    ## Average number of links: 4.816327

    attr(nb_q, "region.id")[1:10]

    ##  [1] "1"  "2"  "3"  "4"  "5"  "6"  "7"  "8"  "9"  "10"

    spdep::is.symmetric.nb(nb_q)

    ## [1] TRUE

In order to make the object more complicated, let us drop the neighbour links for the 21st entity (noting that the print method reports the ID of the entity with no neighbours, not its number in `1:n`), and plot the resulting map of neighbours:

    col2 <- spdep::droplinks(nb_q, 21)

    ## Warning in spdep::droplinks(nb_q, 21): some observations have no neighbours

    ## Warning in spdep::droplinks(nb_q, 21): neighbour object has 3 sub-graphs

    nb_q[[21]]

    ## [1] 24 30 34

    col2[[21]]

    ## [1] 0

    col2

    ## Neighbour list object:
    ## Number of regions: 49
    ## Number of nonzero links: 230
    ## Percentage nonzero weights: 9.579342
    ## Average number of links: 4.693878
    ## 1 region with no links:
    ## 21
    ## 3 disjoint connected subgraphs

    spdep::is.symmetric.nb(col2)

    ## [1] TRUE

    coords <- st_coordinates(st_centroid(st_geometry(columbus)))
    plot(nb_q, coords, col="grey")
    plot(col2, coords, add=TRUE)

## Using sparse matrices to represent spatial weights

At present only `listw` objects can be coerced to objects of classes defined in Matrix. Because the `style` is lost on coercion, it may not be possible to reconstruct spatial weights as the sparse matrix representation does not preserve it. We will start with symmetric binary weights, first creating a spatial weights object, and signalling that one entity has no neighbours with the `zero.policy` argument (default false). The matrix and graph representations of no-neighbour entities are not obvious.

    nb_B <- spdep::nb2listw(col2, style="B", zero.policy=TRUE)
    nb_B$style

    ## [1] "B"

### Symmetric sparse matrices

spdep provides coercion methods from `listw` to the `"symmetricMatrix"`, `"RsparseMatrix"` and `"CsparseMatrix"` classes defined in Matrix. The `"RsparseMatrix"` is the representation that is most similar to `listw`, as it is row-based, but it is used less frequently in operations on sparse matrices. The entity IDs are passed using sparse matrix row and column names at present. Here we believe that our `listw` object can be represented as a symmetric matrix, storing only a triangle rather than both `i`-`j` and `j`-`i` weights. The coercion method does check whether symmetry is present before proceeding:

    library(spatialreg)
    library(Matrix)
    B <- as(nb_B, "CsparseMatrix")
    all(B == t(B))

    ## [1] TRUE

    str(B)

    ## Formal class 'dgCMatrix' [package "Matrix"] with 6 slots
    ##   ..@ i       : int [1:230] 1 2 0 2 3 0 1 3 4 1 ...
    ##   ..@ p       : int [1:50] 0 2 5 9 13 21 23 27 33 41 ...
    ##   ..@ Dim     : int [1:2] 49 49
    ##   ..@ Dimnames:List of 2
    ##   .. ..$ : chr [1:49] "1" "2" "3" "4" ...
    ##   .. ..$ : chr [1:49] "1" "2" "3" "4" ...
    ##   ..@ x       : num [1:230] 1 1 1 1 1 1 1 1 1 1 ...
    ##   ..@ factors : list()

    rownames(B)[1:10]

    ##  [1] "1"  "2"  "3"  "4"  "5"  "6"  "7"  "8"  "9"  "10"

Let us now try to retreive the list of neighbours from the symmetric sparse matrix. At present, we have to coerce from one Matrix internal representation to another in order to get to the `"dgCMatrix"` format used inside `mat2listw`, so we coerce to `"dgTMatrix"` from `"dsTMatrix"`. The style is not retreived automatically, but is set to `"M"` to indicate conversion from a matrix. The neighbour links are retreived correctly, as are the IDs:

    nb_B1 <- spdep::mat2listw(as(as(B, "TsparseMatrix"), "CsparseMatrix"),
        style="B", zero.policy=TRUE)

    ## Warning in sn2listw(df, style = style, zero.policy = zero.policy,
    ## from_mat2listw = TRUE): neighbour object has 3 sub-graphs

    ## Warning in spdep::mat2listw(as(as(B, "TsparseMatrix"), "CsparseMatrix"), :
    ## neighbour object has 3 sub-graphs

    nb_B1$style

    ## [1] "B"

    all.equal(nb_B1$neighbours, col2, check.attributes=FALSE)

    ## [1] TRUE

    all.equal(attr(nb_B1$neighbours, "region.id"), attr(nb_B$neighbours, "region.id"))

    ## [1] TRUE

### Log determinants (symmetric weights) used in spatial regression

An initial reason for implementing support for sparse weights matrices in spdep was to permit the calculation of the log determinant term in spatial regressions for larger data sets. Using the eigenvalue approach with for example `spatialreg::eigenw` is limited by the need to operate on dense matrices in memory to solve the eigenproblem:

    rho <- 0.1
    do_spatialreg <- FALSE
    if (requireNamespace("spatialreg", quietly=TRUE)) do_spatialreg <- TRUE
    if (do_spatialreg) sum(log(1 - rho * spatialreg::eigenw(nb_B)))

    ## [1] -1.44787

When `n` is large, this may become impractical and/or time-consuming, but does permit the rapid calculation of values of the log determinant for differing values of the spatial coefficient \(\rho\). The Matrix package provides many `determinant` methods, here for a `"dsCMatrix"` resulting from subtracting a `"dsCMatrix"`, the product of a scalar and a `"dsTMatrix"`, from a `"ddiMatrix"`. The value of the log determinant follows, calling a sparse Cholesky decomposition internally for suitable input matrices.

    n <- nrow(B)
    I <- Diagonal(n)
    class(I - rho * B)

    ## [1] "dgCMatrix"
    ## attr(,"package")
    ## [1] "Matrix"

    c(determinant(I - rho * B, logarithm=TRUE)$modulus)

    ## [1] -1.44787

The computation of a sparse Cholesky decomposition for each value of the spatial coefficient \(\rho\) may be avoided by updating a pre-computed object; this approach provides fast and accurate log determinants for larger (but not very large) data sets:

    nW <- -B
    nChol <- Cholesky(nW, Imult=8)
    n * log(rho) + (2 * c(determinant(update(nChol, nW, 1/rho), sqrt=TRUE)$modulus))

    ## [1] 15.40218

### Asymmetric sparse matrices

The use of row-standardisation leads to asymmetry even if the underlying neighbours are symmetric, unless all entities have matching numbers of neighbours (for example a regular grid on a torus):

    nb_W <- spdep::nb2listw(col2, style="W", zero.policy=TRUE)
    W <- as(nb_W, "CsparseMatrix")
    str(W)

    ## Formal class 'dgCMatrix' [package "Matrix"] with 6 slots
    ##   ..@ i       : int [1:230] 1 2 0 2 3 0 1 3 4 1 ...
    ##   ..@ p       : int [1:50] 0 2 5 9 13 21 23 27 33 41 ...
    ##   ..@ Dim     : int [1:2] 49 49
    ##   ..@ Dimnames:List of 2
    ##   .. ..$ : chr [1:49] "1" "2" "3" "4" ...
    ##   .. ..$ : chr [1:49] "1" "2" "3" "4" ...
    ##   ..@ x       : num [1:230] 0.333 0.25 0.5 0.25 0.25 ...
    ##   ..@ factors : list()

    all(W == t(W))

    ## [1] FALSE

The `lag` method for `listw` objects is often used to create spatially lagged values, and returns the same values as the vector given by the product of the sparse general matrix and an input numeric vector. Note that by setting `zero.policy` to `TRUE`, the spatial lag of entity 21, which has no neighbours, is zero by construction:

    set.seed(1)
    x <- runif(n)
    r1 <- as.numeric(W %*% x)
    r2 <- lag(nb_W, x, zero.policy=TRUE)
    all.equal(r1, r2, check.attributes=FALSE)

    ## [1] TRUE

    plot(x, r1, ylim=c(0,1))

    c(x[21], r1[21])

    ## [1] 0.9347052 0.0000000

### Log determinants (asymmetric weights) used in spatial regression

Calculating the log determinant for asymmetric weights (here with symmetric neighbours and symmetry induced by non-constant numbers of neighbours) may be carried out using eigenvalues as before, but the result may be a complex vector (here it is not, as discussed below). The appropriate `determinant` method for `"dgCMatrix"` objects uses an LU decomposition internally:

    rho <- 0.5
    sum(log(1 - rho * eigenw(nb_W)))

    ## [1] -1.594376

    class(I - rho * W)

    ## [1] "dgCMatrix"
    ## attr(,"package")
    ## [1] "Matrix"

    c(determinant(I - rho * W, logarithm=TRUE)$modulus)

    ## [1] -1.594376

We can show the internal workings of the method as:

    LU <- lu(I - rho * W)
    sum(log(abs(diag(slot(LU, "U")))))

    ## [1] -1.594376

### Log determinants: symmetric by similarity

The `nb2listw` function stores components that can be employed to transform the asymmetric weights matrix to symmetry by similarity, permitting the same log determinant to be computed using less costly numerical methods. The `"W"` style used the cardinalities of neighbour sets (row sums) to introduce row standardisation, and they are stored as an attribute:

    d <- attr(nb_W$weights, "comp")$d
    all.equal(d, spdep::card(col2))

    ## [1] TRUE

If we first restore the row-standarised matrix to its binary form (which must be symmetric), we can pre- and post-multiply by the square roots of the inverted neighbour counts, yielding a symmetric matrix with the appropriate properties:

    dW <- Diagonal(n, d) %*% W
    all(dW == t(dW))

    ## [1] TRUE

    isd <- Diagonal(n, 1/sqrt(d))
    isd[21,21]

    ## [1] Inf

    Ws <- as(isd %*% dW %*% isd, "symmetricMatrix")
    rowSums(Ws)[21]

    ## [1] 0

    class(Ws)

    ## [1] "dsCMatrix"
    ## attr(,"package")
    ## [1] "Matrix"

    c(determinant(I - rho * Ws, logarithm=TRUE)$modulus)

    ## [1] -1.594376

As can be seen, the division by the square root of zero for entity 21 is not a problem as the row of `dW` is zero. The transformation by similarity permits the use of numerical methods for sparse symmetric matrices (and equivalently for eigenvalues and dense matrices). Note that this transformation is not available for intrinsically asymmetric neighbours, or for intrinsically asymmetric general weights.

### Using `eigs` in RSpectra for finding some eigenvalues

In spatial regression, the domain of the spatial coefficient is given by the inverse of the maximum and minimum eigenvalues. When `n` is moderate, we have the eigenvalues anyway, so the interval for line search is available without extra effort. When `n` is somewhat larger, use may be made of the `eigs` function in RSpectra:

    1/range(spatialreg::eigenw(nb_B))

    ## [1] -0.3212551  0.1638329

    if (!require("RSpectra", quietly=TRUE)) dothis <- FALSE

    1/c(eigs(B, k=1, which="SR")$values, eigs(B, k=1, which="LR")$values)

    ## [1] -0.3212551  0.1638329

In this case, the results are trivial with small `k`.

    1/range(eigenw(nb_W))

    ## [1] -1.544645  1.000000

    1/Re(c(eigs(W, k=1, which="SR")$values, eigs(W, k=1, which="LR")$values))

    ## [1] -1.544645  1.000000

Using row-standardisation has the nice feature of setting the upper bound to unity, and there are graph methods for finding out whether the lower bound is `-1`.

## Using igraph for spatial weights as graphs

### Converting from symmetric adjacency matrix to graph

First we’ll see how to get from sparse matrices to graphs. The mode of a symmetric matrix is `"undirected"` by definition:

    class(B)

    ## [1] "dgCMatrix"
    ## attr(,"package")
    ## [1] "Matrix"

    object.size(B)

    ## 10824 bytes

    if (!require("igraph", quietly=FALSE)) dothis <- FALSE

    ## Loading required package: igraph

    ##
    ## Attaching package: 'igraph'

    ## The following objects are masked from 'package:stats':
    ##
    ##     decompose, spectrum

    ## The following object is masked from 'package:base':
    ##
    ##     union

    g1 <- graph_from_adjacency_matrix(B, mode="undirected")
    class(g1)

    ## [1] "igraph"

    object.size(g1)

    ## 6544 bytes

### Converting from graph to symmetric adjacency matrix

We can also convert this graph back to the same matrix, but note that `as_adjacency_matrix` chooses a particular class of sparse matrix to be returned, so that the conversion process typically leads many matrices to fewer graph types, and back to fewer matrix types:

    # Matrix 1.4-2 vulnerability work-around
    ow <- options("warn")$warn
    options("warn"=2L)
    B1 <- try(as_adjacency_matrix(g1), silent=TRUE)
    if (!inherits(B1, "try-error")) print(class(B1))

    ## [1] "dgCMatrix"
    ## attr(,"package")
    ## [1] "Matrix"

    if (!inherits(B1, "try-error")) print(object.size(B1))

    ## 10824 bytes

    if (!inherits(B1, "try-error")) print(all.equal(B, as(B1, "CsparseMatrix")))

    ## [1] TRUE

    options("warn"=ow)

### Graph components in spdep

A simple example of using igraph to do the same as an existing spdep function is Nicholas Lewin-Koh’s `n.comp.nb` from the early days of the package. It is useful to know whether an `nb` object is divided up into separate subgraphs, and which entities are members of which such subgraph.

    res <- spdep::n.comp.nb(col2)
    table(res$comp.id)

    ##
    ##  1  2  3
    ## 42  1  6

### Graph components in igraph

The same result can be obtained using the `clusters` function in igraph:

    c1 <- components(g1)
    c1$no == res$nc

    ## [1] TRUE

    all.equal(c1$membership, res$comp.id)

    ## [1] "names for target but not for current"

    all.equal(c1$csize, c(table(res$comp.id)), check.attributes=FALSE)

    ## [1] TRUE

The same holds for the row-standardised variant:

    W <- as(spdep::nb2listw(col2, style="W", zero.policy=TRUE), "CsparseMatrix")
    g1W <- graph_from_adjacency_matrix(W, mode="directed", weighted="W")
    c1W <- components(g1W)
    all.equal(c1W$membership, res$comp.id)

    ## [1] "names for target but not for current"

### Shortest paths in weights matrices: igraph

Finding shortest paths between spatial entities across a given graph is a way to express closeness. If the graph is connected, that is that it is possible to traverse the graph edges from any node to any other, the longest shortest path is then a useful measure. In igraph, the `is.connected` function tells us tells us that our graph is not connected, as we know from the figure above. The diameter measure is then the diameter of the largest component subgraph. Note that this generates an `n` x `n` matrix:

    is_connected(g1)

    ## [1] FALSE

    dg1 <- diameter(g1)
    dg1

    ## [1] 7

    sp_mat <- distances(g1)
    str(sp_mat)

    ##  num [1:49, 1:49] 0 1 1 2 2 3 4 3 3 4 ...
    ##  - attr(*, "dimnames")=List of 2
    ##   ..$ : chr [1:49] "1" "2" "3" "4" ...
    ##   ..$ : chr [1:49] "1" "2" "3" "4" ...

### Shortest paths in weights matrices: spdep

If we do the same in spdep, using `nblag` to a maximum number of lag orders - the diameter, but which is unknown in advance (the largest lag order for which the number of links is greater than zero), we run into the problem of how to represent missing neighbour information.

    nbl10 <- spdep::nblag(col2, maxlag=10)

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 1 neighbour object has 3
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 2 neighbour object has 4
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 3 neighbour object has 8
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 4 neighbour object has 8
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 5 neighbour object has 14
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 6 neighbour object has 29
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 7 neighbour object has 43
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 8 neighbour object has 49
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 9 neighbour object has 49
    ## sub-graphs

    ## Warning in spdep::nblag(col2, maxlag = 10): lag 10 neighbour object has 49
    ## sub-graphs

    vals <- sapply(nbl10, function(x) sum(spdep::card(x)))
    zero <- which(vals == 0)
    zero[1]-1

    ## [1] 7

If we insert zero into the weights matrix where there is no connection using `zero.policy=TRUE`, we generate a zero shortest path. If we are to create a matrix that matches the one produced by `shortest.paths`, we need to set all these non-structural zeros to infinity (the length of the path between unconnected nodes), and re-instate structural zeros on the diagonal:

    lmat <- lapply(nbl10[1:(zero[1]-1)], spdep::nb2mat, style="B", zero.policy=TRUE)
    mat <- matrix(0, n, n)
    for (i in seq(along=lmat)) mat = mat + i*lmat[[i]]
    mat[mat==0] <- Inf
    diag(mat) <- 0
    all.equal(mat, sp_mat, check.attributes=FALSE)

    ## [1] TRUE

### Smirnov/Anselin (2009) cyclical matrices

Another area in which a graph representation might prove useful is in trying to establish the domain of the spatial coefficient when spatial weights are row-standardised. In that case by construction we know that the maximum eigenvalue is 1. If there are multiple blocks, that is graph components, where the numbers of nodes per block are greater than 1, then each will have a maximum eigenvalue of 1. The remaining problems are the numbers of zero eigenvalues (at least the singleton graph components), and whether any non-singleton component fulfills the condition termed by Smirnov and Anselin (2009) a cyclical matrix, for which the minimum eigenvalue is -1. The term cyclical appears to be used in many different ways, and it is not clear that its use here after Smirnov and Anselin (2009, pp. 2984-2985) indicates which meaning should be used to find the relevant graph function. The definition used here is that a block matrix (subgraph) is cyclical if: “for every location, every pair of its neighbours are not connected.” That is, if w[i,j] and w[i,k] are greater than zero, w[j,k] must be zero to meet the condition.

The internal function find_q1_q2 returns the number of non-singleton components, and the number of these that meet this condition. It does this for each block/subgraph by testing the condition until it meets w[j,k] > 0, at which point it breaks. Smirnov and Anselin (2009) state that rook neighbours on a regular grid meet the condition:

    nb_r <- spdep::cell2nb(7, 7, type="rook")
    nb_rW <- spdep::nb2listw(nb_r, style="W")
    spdep:::find_q1_q2(nb_rW)

    ## [1] 1 1

One block/graph component is found, and this one meets the cyclical matrix condition, as also shown by the domain:

    1/range(Re(eigenw(similar.listw(nb_rW))))

    ## [1] -1  1

This does not apply to the spatial weights we have been using above, with two non-singleton components, neither meeting the cyclical matrix condition:

    spdep:::find_q1_q2(nb_W)

    ## [1] 2 0

    1/range(Re(eigenw(similar.listw(nb_W))))

    ## [1] -1.544645  1.000000

By construction, all two-node connected graph components also meet the condition, as the eigenvalues sum to zero, and the maximum is unity, so the minimum must be -1.